Pro-tek Chrome Frame Slider Kawasaki 2006 2007 & 2008 Ninja 650R



•2006 2007 & 2008 Ninja 650R EX650R 

Remove the right side fairing panel, then remove the lower front bolt that holds engine mount bracket to frame. Take the bracket with the 9mm mounting hole bottom right hand corner and fit to frame so that the mounting hole sits where you removed the bolt. Fit the 8mm x 30mm cap head bolt through block and into frame. Do not tighten completely yet. Take one of the clamps and two of the 6mm x 30mm cap bolts and fit to block and tighten, then tighten the front 8mm bolt. Take one of the 10mm x 70mm bolts with a washer through the slider and tighten to the bracket. Repeat the process for the left side but use the 8mm x 40mm bolt. 

Includes: (2) Aluminum pucks
              (2) 10mm x 70mm bolts (holds puck to bracket)
              (2) Aluminum mounting brackets 
              (1) 8mm x 30mm bolt (right side) 
              (1) 8mm x 40mm bolt (left side)
              (2) clamps with 6mm x 40mm bolts

Add to Cart:

  • Model: AFP-400
  • Shipping Weight: 1lbs
  • 1 Units in Stock
  • Manufactured by: Pro-tek

This product was added to our catalog on Thursday 15 January, 2015.

Your IP Address is:
Copyright © 2021 GotTheParts4U. Powered by Zen Cart