Pro-tek Chrome Frame Slider Suzuki 1999-2007 GSX1300R Hayabusa

$60.00






Suzuki 

•1999 2000 2001 2002 2003 2004 2005 2006 & 2007 GSX1300R Hayabusa 

The frame sliders are mounted to the upper engine mounts. The fairings require modification during installation. This is best done by first removing the fairing. Locate the engine mount bolt & replace with the supplied bolt. If heat shield foam is not present, apply playdough to inside fairing where cutting will take place. Put the fairing back and see where the bolt head has left an impression in playdough/heat foam. This is the center of the hole to be drilled. Mask outside of fairing with tape to prevent chipping during drilling. Take 2" hole saw and center around bolt head impression in playdough. Drill through fairing. Lightly file down rough edges around hole. Install slider and replace the fairings. Both sides require modifications. 

Includes: (2) Aluminum pucks (identical)
             (1) 10mm x 1.25 x 90mm bolt (left side)
             (1) 10mm x 1.25 x 100mm bolt (right side)

Add to Cart:

  • Model: AFP-80
  • Shipping Weight: 1lbs
  • 1 Units in Stock
  • Manufactured by: Pro-tek


This product was added to our catalog on Thursday 15 January, 2015.

Your IP Address is: 35.173.234.169
Copyright © 2021 GotTheParts4U. Powered by Zen Cart