Pro-tek Chrome Frame Slider Kawasaki 1996-2003 Ninja ZX7R ZX7RR

$60.00






Kawasaki 

•1996 1997 1998 1999 2000 2001 2002 & 2003 Ninja ZX7R

The frame sliders are mounted to the upper engine mounts. The fairings require modification during installation. This is best done by first removing the fairing. Locate the engine mount bolt & replace with the supplied bolt. Only remove one side at a time. If heat shield foam is not present, apply playdough to inside fairing where cutting will take place. Put the fairing back and see where the bolt head has left an impression in playdough/heat foam. This is the center of the hole to be drilled. Mask outside of fairing with tape to prevent chipping during drilling. Take 2" hole saw and center around bolt head impression in playdough. Drill through fairing. Lightly file down rough edges around hole. Install short slider with long bolt and nut on left side and replace the fairings. Repeat process on right side with long slider and short bolt and nut.

Includes: (2)Aluminum pucks
              (1) 12mm x 1.75 x 120mm offset puck with lock nut(right side) 
              (1) 12mm x 1.75 x 130mm flat puck with lock nut(left side)

Add to Cart:

  • Model: AFP-50
  • Shipping Weight: 1lbs
  • 1 Units in Stock
  • Manufactured by: Pro-tek


This product was added to our catalog on Thursday 15 January, 2015.

Your IP Address is: 35.173.234.169
Copyright © 2021 GotTheParts4U. Powered by Zen Cart