Pro-tek Acetal Frame Slider Honda 1997-2007 CBR1100XX Blackbird



•1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 & 2007 CBR1100XX Blackbird 

The frame sliders are mounted to the upper engine mounts. Both fairings require modification during installation. This is best done by first removing the fairing. Locate the engine mount bolt & replace with the supplied bolt. If heat shield foam is not present, apply playdough to inside fairing where cutting will take place. Put the fairing back and see where the bolt head has left an impression in playdough/heat foam. This is the center of the hole to be drilled. Mask outside of fairing with tape to prevent chipping during drilling. Take 2" hole saw and center around bolt head impression in playdough. Drill through fairing. Lightly file down rough edges around hole. Install slider and replace the fairings. 

Includes: (2) Acetal pucks with aluminum bushings (identical) 
              (2) 10mm x 1.25 x 90mm bolts

Add to Cart:

  • Model: FP-170
  • Shipping Weight: 1lbs
  • 1 Units in Stock
  • Manufactured by: Pro-tek

This product was added to our catalog on Tuesday 13 January, 2015.

Your IP Address is:
Copyright © 2020 GotTheParts4U. Powered by Zen Cart